PRODUCT INFORMATION TANTALUM SHEET, PLATE, ROUND DISK AND FOILShenzhen Sunrise Metal Industry Co.,Ltd
0086-0755-27185042
http://www.sunriseta.com
sales@sunriseta.com
http://www.sunriseta.com
sales@sunriseta.com
skype :Li.mary9
QQ :1957953030
wahtsapp: 15919982500
TANTALUM SHEET, PLATE, ROUND DISK AND FOILSHENZHEN SUNRISE METAL INDUSTRY CO.,LTD
’s tantalum sheet and foil are popular for chemical processing applications, where customers can convert it into lining for columns, vessels, tanks, reactors, parts for heat exchangers, and more.
Customers transform our tantalum plate into products for military, chemical processing, and other anti-corrosion type applications.
| 
Tantalum Mill Products
|
Both tantalum sheet and plate are used by customers in the manufacturer of components for anticorrosion equipment. Round discs cut from tantalum plate are employed to repair and reinforcement work in anti-corrosion equipment.
Because of their strength and workability, very thin sheets of tantalum can be clad to other surfaces, providing superior corrosion protection and cost effectiveness.
Our tantalum sheet and plate are supplied with a cold-rolled and chemically cleaned surface. The sheet and plate may be locally conditioned to remove defects, provided that thickness tolerance is maintained.
Depending on your specifications and needs, all of our tantalum sheet, plate, and foil are visually inspected for slivers, laminations, excessive roll marks and handling scratches.
ULTRA76 Ta alloys offer higher corrosion resistance in most environments generating value added by extending product life time, reducing material thickness and improving processes throughput.
- Higher temperatures possible, shorter cooling/heating cycle times
- Constant surface finish (Ra<0.8 micrometers)
- Material only from non-conflict sources,
SHENZHEN SUNRISE METAL INDUSTRY CO.,LTD raw material
is EICC certified - Uniform wall thickness
- Best flatness for explosion clad applications
Dimensions
| Form | Thickness, Dia., Wall inches (mm) | Width, Length inches (mm) |
| Tantalum Foil | 0.0005“ to 0.005“ (0.0127 to 0.1270 mm) | 12“ maximum width x coil (30.5 mm max. width x coil) |
| Tantalum Sheet | 0.005“ to 0.020“ (0.1270 to 0.50 mm) | 36“ maximum width x coil (915 mm max. width x coil) |
| Tantalum Sheet | 0.015“ to 0.060“ (0.380 to 1.524 mm) | 40“ width x coil (1000 mm width x coil) |
| Tantalum Round Disk | Thickness: 0.060" to 0.125" (1.524 to 3.175 mm) | Up to 37 in diameter |
| Tantalum Plate | 0.060“ to 0.125“ (1.524 to 3.175 mm) | width not to exceed 40“ (1000 mm) |
*Total weight of finished plate not to exceed 350 Ib.
Mechanical Properties for Sheet and Plate
| Grade and Form | Ultimate Tensile Strength min, psi (MPa) | Yield Strength min, psi (MPa) (2% Offset) | Elongation min, % (1 inch GL) |
| Unalloyed Tantalum (R05200), (R05400) Plate, Sheet and Strip 0.003“ - 0.060“ thick >_ 0.060“ thick | 30 000 (207) 25 000 (172) | 20 000 (138) 15 000 (103) | 20 30 |
| 97.5% Tantalum, 2.5% Tungsten, (R05252) Sheet and Strip Plate | 40 000 (276) 40 000 (276) | 30 000 (207) 28 000 (193) | 20 20 |
Please contact us for additional sizes and requirements.
Tantalum and Tantalum Alloy Products:
Refer to Product Data Sheets for Tantalum for sizes:
PD-7033 NRC Ultra 76 Tantalum Alloy (Ta 2.5%W)PD-7035 NRC Tantalum (UNS R05200)
PD-7036 NRC Tantalum Beam Melted Tantalum (ETA) (UNS R05200)Shenzhen Sunrise Metal Industry Co.,Ltd
0086-0755-27185042
http://www.sunriseta.com
sales@sunriseta.com
http://www.sunriseta.com
sales@sunriseta.com
skype :Li.mary9
QQ :1957953030
wahtsapp: 15919982500
没有评论:
发表评论